Design and engineering of an Azenco SkyTilt motorized louvered roof for B2 Bistro's Point Pleasant location on the Jersey Shore — engineered for coastal wind exposure and the salt-air environment.
B2 Bistro Point Pleasant is the brand's Jersey Shore restaurant location. The patio needed the same motorized SkyTilt coverage system used at the inland B2 locations, with engineering specifications adjusted for coastal wind exposure and the salt-air corrosion environment.
Ownership wanted the structure to read consistently across the B2 portfolio — same architectural language, same operational behavior — while accounting for the Point Pleasant site's specific environmental conditions.
Ocean County commercial code required PE-stamped engineering for the coastal wind loads in both open and closed louver states. Material specifications also needed to be graded for ocean-adjacent corrosion resistance.
Breslow developed the Point Pleasant design around the Azenco SkyTilt™ motorized louvered roof, with material grades specified for coastal exposure and engineering stamped for the higher wind loads of the Jersey Shore location.
The design package included photo-real renderings of the patio from multiple viewing angles. Aluminum louvers tilt for sun and ventilation, close and seal against rain — fully automated, no staff intervention during service. Integrated drainage routes water through the structural columns.
Full turnkey scope: coastal-grade design → PE engineering → Point Pleasant permitting → Azenco fabrication with corrosion-resistant finishes → installation → lifetime service. Sequenced around restaurant operating hours so peak season was never interrupted.
Every commercial structure Breslow installs ships with PE-stamped engineering calculated for the actual site — not a generic dealer spec sheet. Here is what went into B2 Bistro Point Pleasant.
Commercial decisions aren't made from a pergola catalog. Every Breslow commercial project begins with a photo-real design rendering so stakeholders — owner, GM, board, architect — see the finished space before a single beam is ordered.
Rendering
Installed
Commercial coastal restaurant louvered roof installations of this scope typically run $125K–$275K depending on patio area, coastal-grade material specifications, structural attachment requirements, perimeter screens, lighting, and finish selections. The B2 Point Pleasant scope was a full-coverage SkyTilt motorized louvered roof in coastal-grade specifications. Every Breslow commercial quote is fixed-price and includes engineering, permits, fabrication, and installation. Request a site walk for an exact estimate.
From signed contract to first service under the new structure, coastal restaurant installations like B2 Point Pleasant run 12–18 weeks: 3 weeks design + photo-real rendering, 4–5 weeks PE engineering and Point Pleasant permitting, 5–7 weeks coastal-grade Azenco fabrication and finishing, and 2–3 weeks on-site installation. We sequence around restaurant operating hours so peak season is never interrupted.
Yes. Breslow Design & Build is the Northeast's premier certified Azenco commercial dealer, serving NJ, NY, CT, PA, MD, DE, RI, MA, and FL. Our field crews operate out of Springfield, NJ. We've delivered commercial projects for restaurant groups, country clubs, rooftop venues, and hospitality properties across the region. Every commercial scope includes PE-stamped engineering, permitting, fabrication, installation, and lifetime service — all in-house.
Yes. Every commercial structure Breslow installs ships with site-specific PE-stamped structural engineering — wind loads calculated for the actual site (both louvers open and louvers closed), snow loads sized to local code, and stamps issued in the state where the project is built. Architects and GCs receive full shop drawings and AIA-compatible specs as part of the standard scope, not as an add-on.
Azenco-manufactured Motorized SkyTilt Louvered Roof systems carry a 20-year structural warranty on the aluminum extrusion and a 5-year warranty on motors, electronics, and finishes. Breslow installation work is warranted separately, and every motorized system we install is backed by our in-house lifetime service team — one phone call, one team, for as long as the structure is on your property.
A Breslow project manager on every commercial job. One point of contact from the first site walk through final punch list. No relay between sales, design, engineering, and install.
PE-stamped engineering is standard, not an add-on. Commercial load calculations, wind ratings (open and closed louvers), and state-specific stamps are included in the scope. Architects and GCs receive full shop drawings and AIA-compatible specs.
Permitting across the Northeast. We expedite DOB submissions, handle state-specific commercial requirements, and track the approval timeline so construction starts on schedule.
Full lifecycle — not a dealership handoff. Most Azenco dealers sub out engineering, permitting, and service. Breslow keeps all of it in-house. That's why country clubs, restaurant groups, and commercial property owners across 9 states trust us with their outdoor revenue.
102 years of continuous operation. Breslow was founded in 1924 and is still Shaw-family operated. When you install a commercial structure from us, the company backing the warranty will still be here in ten years.
Lifetime service on everything we install. Motorized systems need a service partner. We are that partner — one phone call, one team.
Tell us what you're trying to build. Our commercial team will walk your site, develop a photo-real design rendering, and give you a PE-stamped engineering scope and timeline — before you commit to anything.
b2-bistro-north brunswick-design-renderrings-breslow-skytilt.jpg)
